Jr Marine Bravo 3 Cutout Template

Drives Bravo Three® Mercury Marine

My boat has the merc threaded plug kit and a jr marine cover plate modification. This kit will only work on bravo 1, bravo 2, bravo 3, and alpha 1 gen 2. Carefully cut out window pattern with die grinder cutting through all of the 3/32 holes. 1 the standard tap and drill on both sides of my transom plate,.

Johnny bravo Invitation Customizable Template DIY CustomPartyShirts

I have found two options: This kit will only work on bravo 1, bravo 2, bravo 3, and alpha 1 gen 2. This is where the jr marine repair kit comes into play. If you can only do one mod, the jr marine kit is best, but having 3 access holes is awesome. Do not remove this pattern until all.

23 JR marine Barry Bowe

Do not remove this pattern until all holes are. 1 the standard tap and drill on both sides of my transom plate, or 2 the jr marine method of drilling and cuting a plate size hole in the back or the transom plate (both options are expensive). Changing the gimbal ring or steering lever without removing the engine is very.

Bravo 3 Stainless Steel Propeller Wrench Hill Marine

Cut through all green holes first and red holes last. Cut drill template out on solid black line as close as possible place pattern on gimbal, lining bottom edge of pattern with bottom flat edge of gimbal housing, centerng template from right to left and scotch tape pattern to housng. I am being told that my gimbal ring needs replaced.

Mercruiser Bravo 3 Zinc Anode Kit Sea Shield Marine

This is where the jr marine repair kit comes into play. Do not slip and cut outside of window pattern!! This kit will only work on bravo 1, bravo 2, bravo 3, and alpha 1 gen 2. I have found two options: Changing the gimbal ring or steering lever without removing the engine is very easy on my boat.

Jr Marine Bravo 3 Cutout Template - Cut through all green holes first and red holes last. Do not slip and cut outside of window pattern!! Changing the gimbal ring or steering lever without removing the engine is very easy on my boat. Carefully cut out window pattern with die grinder cutting through all of the 3/32 holes. Do the math to figure where to make the cut out. This is where the jr marine repair kit comes into play.

Cut drill template out on solid black line as close as possible place pattern on gimbal, lining bottom edge of pattern with bottom flat edge of gimbal housing, centerng template from right to left and scotch tape pattern to housng. Carefully cut out window pattern with die grinder cutting through all of the 3/32 holes. Wait to get the actual template to drill the screw holes though. This kit will only work on bravo 1, bravo 2, bravo 3, and alpha 1 gen 2. Do the math to figure where to make the cut out.

My Boat Has The Merc Threaded Plug Kit And A Jr Marine Cover Plate Modification.

I have found two options: This kit will only work on bravo 1, bravo 2, bravo 3, and alpha 1 gen 2. You could even figure out the percentage of difference between the pic and actuall drive and print out the template in the top pic to the correct size. Carefully cut out window pattern with die grinder cutting through all of the 3/32 holes.

Do The Math To Figure Where To Make The Cut Out.

With the kit comes a cardboard template that shows you where to cut on the gimbal housing. 1 the standard tap and drill on both sides of my transom plate, or 2 the jr marine method of drilling and cuting a plate size hole in the back or the transom plate (both options are expensive). I am being told that my gimbal ring needs replaced for my bravo 3 outdrive. Cut drill template out on solid black line as close as possible place pattern on gimbal, lining bottom edge of pattern with bottom flat edge of gimbal housing, centerng template from right to left and scotch tape pattern to housng.

Changing The Gimbal Ring Or Steering Lever Without Removing The Engine Is Very Easy On My Boat.

Cut through all green holes first and red holes last. Wait to get the actual template to drill the screw holes though. Do not remove this pattern until all holes are. This is where the jr marine repair kit comes into play.

Do Not Slip And Cut Outside Of Window Pattern!!

If you can only do one mod, the jr marine kit is best, but having 3 access holes is awesome.